Products

Tracheostomy Tube

��Performance, Structure and Components��: This product consists of tube body, obturator, tube connector, cuff, control valve, pilot balloon, inflation tube and inner cannula.

��Application��For clinical anaesthesia, artificial ventilation or other assisted ventilation.

Tracheostomy Tube

[Function Description]��For long time open airway condition use;

Connection to ventilator;

Soft low-pressure and high-volume cuff;

Various inner cannula sizes available;

Inner cannula is placed in the tracheostomy tube and can be cleaned and replaced at any time to maintain patient's airway clean and unobstructed.

Tracheostomy Tube
Specification	Size
PC04-100/800/060	ID6.0mm
PC04-100/800/065	ID6.5mm
PC04-100/800/070	ID7.0mm
PC04-100/800/075	ID7.5mm
PC04-100/800/080	ID8.0mm
PC04-100/800/085	ID8.5mm
PC04-100/800/090	ID9.0mm
PC04-100/800/095	ID9.5mm
PC04-100/800/100	ID10.0mm

Suctionaid Tracheostomy Tube

[ Function Description]��Special design of suction catheter facilitates the extraction of secretions on the cuff, significantly reducing the risk of aspiration pneumonia;

Various inner cannula sizes available;

Inner cannula is placed in the tracheostomy tube and can be cleaned and replaced at any time to maintain patient's airway clean and unobstructed.

Suctionaid Tracheostomy Tube
Specification	Size
PC04-100/860/060	ID6.0mm
PC04-100/860/065	ID6.5mm
PC04-100/860/070	ID7.0mm
PC04-100/860/075	ID7.5mm
PC04-100/860/080	ID8.0mm
PC04-100/860/085	ID8.5mm
PC04-100/860/090	ID9.0mm
PC04-100/860/095	ID9.5mm
PC04-100/860/100	ID10.0mm

��Operation Instruction��

These instructions are intended for use with the following products��

PC04-100/800/060-100	Tracheostomy tube, soft sealed cuff, size 6.0-10.0mm
PC04-100/860/060-100	Suctionaid tracheostomy tube, soft sealed cuff, size 6.0-10.0mm

Attention�� 1 Inner cannula is an optional accessory.

2 The use of an inner cannula reduces the airway diameter by 1.5mm (excluding size 6.0mm tracheostomy tube which reduces the airway diameter by 1.0mm)

[Description]��

A sterile range of single use tracheostomy tubes manufactured from clear biocompatible Polyvinyl Chloride (PVC) incorporating the following features:

· Smooth arc shaped design with tapered tip to assist placement and removal of both tracheostomy tube and smooth inner cannula with minimal disruption to patient's anatomy.

· Thermosensitive materials with sufficient initial rigidity for insertion which then conforms to the individual patient's upper respiratory tract at body temperature ensuring minimum trauma.

· 15mm connector for connection to anaesthetic or ventilator breathing circuit is located on the tube (not the inner cannula).

· Anatomically shaped flange for improved patient comfort and improved security of the tracheostomy tube.

· New sealed cuff design with smooth transition to tracheostomy tube to improve ease of insertion.

· A hollow obsturator with atraumatic tip for use with or without guide wire for improved ease of insertion. The obsturator retaining clips prevent obturator movement during insertion.

· Inner cannula can be reusable. The "pulling ring'"makes it easy to insert/remove the inner cannula into/from tracheostomy tube.